Upcom Y User's Guide

UPCOM TECHNOLOGIES1User GuideC BandBLOCK UP CONVERTERSModel Y

UPCOM TECHNOLOGIES10Status DisplayThis indicator shows the general status of the Outdoor BUC – if everything is good, or if anerror condition has occu

UPCOM TECHNOLOGIES11Quick Start Guide Connect the low power L Band output from a modulator or a 10MHz Insertion Box tothe BUC Input port. Nominal in

UPCOM TECHNOLOGIES12General MaintenanceWith proper care and maintenance, your BUC will provide many years of reliable service.Please follow these main

UPCOM TECHNOLOGIES13Appendix A – UC 40C Series Y BUCInput Frequency Range 950 – 1700 MHzOperating Frequency Range 5.85 – 6.60 GHzOutput Power 46 dBm (

UPCOM TECHNOLOGIES2Table of ContentsTable of Contents...

UPCOM TECHNOLOGIES3Outdoor Block Up-Converter - BUCUser GuideThis section provides general information for the UPCOM TECHNOLOGIES line of C BANDOutdoo

UPCOM TECHNOLOGIES4General InformationSafety ConsiderationsPotential safety hazards exist unless proper precautions are observed when working with thi

UPCOM TECHNOLOGIES5Ports and InterfacesPrime Power ConnectionThe Prime Power Connector is the point where the unit receives input power.The AC input c

UPCOM TECHNOLOGIES6RF OutputThe RF Output is provided at a waveguide flange in the Outdoor BUCs. The C Band BUCshave CPR style grooved flange (CPR-137

UPCOM TECHNOLOGIES7Monitors and ControlsMonitor signals and Control lines are present on the M & C Connector when this option isinstalled. With a

UPCOM TECHNOLOGIES8Connectors Pin-outJ4 M&C connector 10pin PT02 E12-10PRS 485 RS 232A Rx+ J RxB Rx- K TxC Tx+ G GNDD Tx- COM port setting: 9600 b

UPCOM TECHNOLOGIES9Ground (GND)This pin is connected to the chassis, which also represents the main Ground of the unit.The installation of the BUC at